URO Parts
Login: /

Brake Light Switch

Part
1C0 945 511A / URO-012812
Weight (Pounds): 0.1
AudiTT20004-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20014-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20024-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20034-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20054-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20064-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch

TT Quattro20004-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20014-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20024-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20034-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20054-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20064-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch
VolkswagenBeetle20014-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20024-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20034-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20054-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20064-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20074-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20084-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch

Golf1999MfrBodyCode: A4
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20004-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20014-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20024-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20034-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20054-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20064-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch

Jetta1999MfrBodyCode: A4
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20004-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20014-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20024-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20034-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


20054-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch

Touareg20044-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


2005Engine: 3.2L 3189CC 195Cu. In. V6
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch



Engine: 4.2L 4172CC 254Cu. In. V8
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


2007SubModel: TDI
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch


2008SubModel: TDI
4-Pin
Special care must be taken during installation to prevent damage and obtain proper electrical contact
Prior to installation pull plunger to full extension, use and apply lubricant to plunger. Keep pedal in up position.
Push switch in and seat into opening pressing against pedal. Once seated secure switch by turning it to the right approximately 45 degrees.
This action turns the plunger shoe into the correct position to make contacts operate.
Part: Brake Light Switch
Last Updated: 6/14 14:01:02